Ideal for use when pre-dampening isn’t practical, a 30-inch (.80m) or longer hose extension between nozzle body and nozzle tip allows for more complete wetting and material mixing. This nozzle normally has Hamm tip and nozzle but others will fit same threads. Certain materials require even more wetting than the single nozzle body Hydro-mix.

Various combinations of one or two nozzle bodies are employed, either close-coupled or as far as 10 feet (3m) apart. Occasionally, the second nozzle body is used for liquid admixtures. Alloy nozzle bodies and 2-inch (51mm) sizes are available. The longer version shows water valve extension close to nozzle and nozzle body farther back, for additional wetting.

Specifications
Process Type	Dry

Technical Information
Size	Complete Assembly Part #*
1" (25mm)	23-740
1-1/4" (32mm)	23-741
1-1/2" (38mm)	23-743
1-5/8" (41mm)	23-744
2" (51mm)	23-745

* Part numbers are for short 30-inch (762mm) brass hydro-mix assemblies. Consult factory for special combinations.