This top-quality mandrel-made dry-process hose represents a major breakthrough in hose manufacturing techniques and has a much longer expected life than any competitive hose. The combination of carcass material and braiding technique provides the greatest amount of internal pure gum rubber tube possible in each size. Static build-up is reduced by the use of copper wire and conductive rubber cover.

Specifications
Process Type	Dry

Technical Information
Size	Outside Diameter	Tube Thickness	Braids	Brass Couplings Part #	Swivel Couplings Part #	Without Couplings Part #
1" (25mm)	1-21/32" (42mm)	18/64" (7mm) tan gum	1	23-716	-	23-500
1-1/4" (32mm)	2-1/8" (54mm)	23/64" (9mm) tan gum	1	23-717	23-773	23-501
1-1/2" (38mm)	2-11/32" (60mm)	22/64" (9mm) tan gum	1	23-719	23-775	23-503
1-5/8" (41mm)	2-13/32" (61mm)	20/64" (8mm) tan gum	1	23-720	23-776	23-504
2" (51mm) Red Stripe	2-15/16" (75mm)	22/64" (9mm) tan gum	2	-	23-783	23-241
2" (51mm) Blue Stripe	2-15/16" (75mm)	22/64" (9mm) tan gum	2	-	23-785	23-242
1-1/2" (38mm) Yellow Stripe	2-11/32" (60mm)	9/32" (7mm) black SBR	2	76-119	76-128	76-117
1-5/8" (41mm) Yellow Stripe	2-13/32" (61mm)	9/32" (7mm) black SBR	2	23-780	23-774	76-473
2" (51mm) Yellow Stripe	3" (76mm)	9/32" (7mm) black SBR	2	-	23-976	76-118
2-1/2" (64mm) Yellow Stripe	3-1/2" (89mm)	9/32" (7mm) black SBR	2	-	-	76-116

Working pressure is based on minimum burst pressure values per manufacturer’s specification. The appropriate high pressure couplings and weld ends must be used. Values are for current supplied product. Consult Allentown for specific applications. Failure/burst pressures are for new hose when installed and used properly.