Allentown’s wet-process Kleber Premium Hose is the highest quality, steel-reinforced discharge hose available on the market today. It’s highly abrasion resistant to give extended service life and is extremely flexible for ease in handling. The hose is constructed of a robust structure to withstand heavy compressive loads and guarantee maximum safety. This hose is recommended for shotcrete and nozzling applications.

Specifications
Process Type	Wet

Technical Information
Size*	Ends	Part #
1-1/2" x 25' (38mm x 8m)	HD-HD	23-650
1-1/2" x 50' (38mm x 15m)	HD-HD	23-934
1-1/2" x 25' (38mm x 8m)	GR-GR	23-338
1-1/2" x 50' (38mm x 15m)	GR-GR	23-339
2" x 5' (51mm x 2m)	HD-HD	23-689
2" x 10' (51mm x 3m)	HD-HD	23-688
2" x 25' (51mm x 8m)	HD-HD	23-161
2" x 50' (51mm x 15m)	HD-HD	23-155
2-1/2" x 25' (64mm x 8m)	HD-HD	23-133

Kleber
Size*	Working Pressure (psi) ar 4:1 sq ft**	Burst Pressure (observed)	Manufacturer Minimum Burst Pressure
1-1/2" (38mm)	750 psi (52 bar)	2,750 psi (190 bar)	2,200 psi (152 bar)
2" (51mm)	600 psi (41 bar)	2,725 psi (188 bar)	1,850 psi (128 bar)
2-1/2" (64mm)	750 psi (52 bar)	2,400 psi (166 bar)	2,200 psi (152 bar)
3" (76mm)	600 psi (41 bar)	2,312 psi (159 bar)	1,850 psi (128 bar)

*Contact factory for additional Kleber Premium Hose sizes.
**Allentown recommends the use of Hevi-Duty ends for longer service life and safety when pumping at high pressures.

Working pressure is based on minimum burst pressure values per manufacturer’s specification. The appropriate high pressure couplings and weld ends must be used. Values are for current supplied product. Consult Allentown for specific applications. Failure/burst pressures are for new hose when installed and used properly.